Cleaning your windshield should always be part of your routine. Dust or dirt easily cover your vehicle glass which can be harmful for you and other people with whom you’re driving. Of course, it’s not enough that you are using the best windshield cleaner. You need to know how to clean the windshield using the cleaner as well. If you don’t know how to do it yet, here are the ways on how to clean your windshield using the best windshield cleaner.
How to Clean the Outside of Your Windshield?
Step 1: Lift the wipers up.
Before you start putting or spraying a windshield cleaner, lift up the wipers to make sure that all the area will be cleaned.
Step 2: Use your windshield cleaner for half of your windshield.
Start applying your windshield cleaner on one half of your glass. Apply enough amount of cleaner. The amount should depend on the size of your windshield.
Step 3: Vertically wipe your windshield.
Put your rag from the top and slide it down. Then, make another vertical trace for the further side. Pull your rag from the top then slide it down. Do not alternate your moves (top to bottom then bottom to top) for that won’t get the dirt and dust successfully. Do the vertical wipes for the part that you are working on. Fold your rag to get the cleaner side of it to avoid the dust from coming back on the glass.
Step 4: Horizontally wipe your windshield.
After the vertical wipes, you should the make another set of horizontal wipes. Still, start from the top of your car windshield. Extend your arm with your rag to the center of the glass then wipe to the edge of the windshield. Just like the vertical wipes, make another horizontal lines until you reach the bottom of your car windshield.
Step 5: Repeat the process for the other half of your glass.
If you are done with the one side, start applying steps 2 to 4 to the uncleaned part of your windshield. Do the vertical sets of wipes first, then the horizontal ones.
Step 6: Wipe your windshield in circular motion.
The previous sets of wipes are needed to wipe off the dirt or dust and the car windshield cleaner that you use on your windshield. So, get another clean tower to be used for this final step. Move hand in circular motion. Do it on all areas of your windshield.
Now, you may have your freshly-cleaned outer windshield. You may now enjoy a very clear view of the road.
How to Clean the Inside of Your Windshield?
Of course, the inside of your windshield is as important as the outside one. There is no reason for you to skip cleaning this. Here are the steps on how to clean it with your inside windshield cleaner.
Step 1: Protect your dashboard with a towel first.
To avoid some sticky drips coming from your inside windshield cleaner, cover your dashboard with a towel first. Make sure that you leave no important part exposed. You don’t want to risk damaging any electronics.
Step 2: Start putting or applying the windshield cleaner.
Using a microfiber rag, start spraying or putting some inside windshield cleaner on one half of your windshield. Then, you may start wiping.
Step 3: Vertically wipe your windshield.
Make vertical wipes on the inner side of your windshield glass. To do so, just slide the rag from top to bottom. Do this several times until all dirty spots are gone. Don’t attempt to turn into another direction. You can’t shift to wiping from bottom to top as this will create unnecessary streaks.
Step 4: Horizontally wipe your windshield.
After making vertical wipes, try going horizontal this time. Slide the rag from the top corner towards the right or left side, depending on which side of the windshield you’re cleaning. Do this until the glass is spotless.
Step 5: Work on the other part of the car windshield.
Spray or put some windshield cleaner on the other half of the interior glass. Apply step 3 and 4 again.
Step 6: Do the final buffing.
Buff your windshield with a clean microfiber rag. Check if the glass is already spotless. If not, you may have to apply a windshield cleaner again.
No comments:
Post a Comment